Repairing Cracked Sinks

Cracked sinks have presented quite a problem as far as repairs are concerned. Repairing a cracked sink was very hit and miss. If the crack was stable then possibly repairing the crack and resurfacing the whole sink would be a solution. There was no telling if the crack would grow or not however.So this work could not be warranted. If the cracking was really extensive and also on the underside it was impossible to say the repair would last for any length of time.

With antique sinks cracks are fairly common so this presented a big problem. Also if we did resurface the sink completely the logo or makers stamp would be lost. Many clients felt this was unacceptable and were unhappy at losing the stamp.

The Bath Business have restored old sinks for many years now. Over the last 18 months we have been piloting a new technique to sort out the basins with cracks. We can even sort out bits that have come off. We can now restore these sinks. Whats more we can also retain the manufacturers logo or mark. As we have been doing this service successfully for 18 months we feel we have tested the techniques enough to warranty the restoration work.

Above and below is a lovely Shanks sink we restored in our workshop. The sink is a great example of a classic large Shanks sink. It had manged to get damaged quite badly in the inside and underside. Normally this sink would not be repairable. Certainly it would not be repaired with any confidence that the repair would last.

We repaired the inside and outside of the sink. We restored this sink before we had developed a method of preserving the makers stamp or logo. As Shanks sinks are so distinctive in style and shape it was not viewed as a problem. As you can see it has come up beautifully and now has pride of place in the clients bathroom.