George Jennings Brought Back From The Dead


This is a rare tilting sink by George Jennings. We do not have an exact date but these sinks were quite early (circa 1860) and were one of the designs one comes across before the waste and overflow became pretty much the norm for basin design.

Here is the basin in situ prior to restoration work.

George Jennings himself was one of the giants of Victorian Sanitation. It was his toilets which were introduced at the Great Exhibition of 1851 in the Crystal Palace in London. This was the first time many people had the chance to use a flushing toilet and many, many people went ahead and did so. Over 800,000 people paid over a penny each to gain access to this new and exciting experience. It seems strange to us now but the impact the toilets at this exhibition made was massive. The phrase “to spend a penny” meaning “to use the loo” stems from George Jenning’s toilets. And within 4 years of the exhibition there were over 200,000 flushing toilets in London alone. Now the very idea of not having a flushing toilet in your home is completely foreign and unacceptable.

The tilting sink was a design the allowed the sink to swivel round on two pivots to be emptied. There was no plug hole.

It looks like the tilting sink was introduced after 1851 but before the turn of the century, as it seems to appear after the Great Exhibition of 1851 but was still referred to as “Jennings’ patent tilt-up and lipped lavatory”. What we now call the “wash basin” was called the “lavatory” until the turn of the century! A bit confusing sometimes. When discussing antiques we do sometimes forget and call the item a lavatory instead of a sink.

The basin itself was in a pretty sorry state and had many cracks and repairs on it. It appears as though the basin had had different repairs done to it on at least 3 separate occasions. Some of the repairs were held together with glue, some with a white hard paste and one particular area with staples. Staples or riveting was a common way to repair ceramics from the 18 century up until approx. 1910. We think this basin may first have been repaired circa 1885.

Here are some pictures showing the basin prior to restoration and with the poor repairs.

Some of the repaired pieces of porcelain were sitting proud of the rest of the sink, especially around the edge.

The first thing that was done was to break the bowl back down into its pieces and clean off the glue, etc that had been used in the previous repairs.

Then the bowl put back together with the parts fitting as tightly together as we could get. Sometimes this required grinding small areas away to allow the pieces to slip together. Once the basin was all back together there were still some areas sitting a little high.

To handle the high areas the basin was treated with high build primers and fillers to smooth out these areas.
Then the basin colour was matched and the basin sprayed.

The brass pivots need to be re-attached, but this is going to be left until the basin gets back to its home and the positioning of the pivots can be checked to ensure they are fixed in exactly the right place.
Then the pivots will be fitted in place using a putty mixture which is what was used originally for this type of work.

Here are some pictures of the basin after restoration. Hopefully we will get some pictures from the client with the basin in situ again and ready to be used again for another hundred or so years!



We were asked to restore some old antique sinks in an old property. When we arrived we found a lovely old property having its original features, fixtures and fittings restored and renewed. As there were over a dozen bedrooms it was a relatively big undertaking.

The basins were part of the restoration work so we were called in as the restoration experts to restore them. We had to repair some cracked sinks. We did also restore some fantastic antique baths in this property.


The basins we were asked to restore were in the bedrooms. As an aside the bedroom vintage wallpaper looks fantastic! There were quite a few sinks that were cracked or completely broken. Repairing cracked sinks is a specialist job.

The fact that the basins had lasted so long was amazing. They were original John Bolding Basins from the first Bolding works. This dates the basins circa 1880-1890.

John Bolding and Sons Ltd were great rivals of Thomas Crapper & Co ltd and in 1963 John Bolding and Sons ltd became the owners of Thomas Crapper and Co ltd. The basins by Bolding are quite distinctive and very aesthetic.

Normally these particlar sinks would be beyond repair. However we have developed an innovative restoration process which we have been using for the last 18 months with great success. So now whereas architectural salvage company’s or private individuals were having to dispose of beautiful antique basins we can restore them. We think we are the only bath and sink restoration company that can fix sinks with cracks or damage such as this.

Once repaired we would normally resurface the sinks completely. They would look fantastic, feel fantastic and look virtually new. However the John Bolding Emblem/Logo would be lost. That was not an option in this situation. So we had to very carefully colour match and blend in our restoration work so that the sinks were renewed but the repairs were virtually invisible and the logo stayed intact. Thus preserving the heritage and integrity of the sinks. As you can see the results are fantastic. Restoration work like this is priceless. These basins could have ended up being thrown out with all the history and heritage lost with them. Now they can be admired and used for the next 100 years.

If you have some historic or antique basins, baths, bidet or toilets you would like to salvage and bring back to life contact: The Bath Business, The Bath and Basin restoration specialist. They can help you.

Bath Repairs, Chip Repairs and Cracks in a Bath



                                                                                                                                                        <back to home page           

The Bath Business delivers a bath repair service for baths that have chips, scratches, cracks, scuffs, dings etc on the bath’s surface.

There are many instances where a bath in otherwise good condition has had its surface chipped or damaged. In such cases a bath repair is a definite option. Rather than resurface the whole bath, which is our mainline service, we would do a localised bath repair to the damaged area only.

If the bath has numerous chips however or the bath repair would need to be done over an extensive area we may well recommend resurfacing rather than attempting to do a bath repair over a large area of damage. Also, when repairing a bath the repair work works best on new baths that have been damaged. If your bath is 20 years old it may well be worth getting the bath resurfaced whilst having any damaged repaired at the same time.

Also if the bath is in a dull or worn condition and also has a chip or two we may recommend resurfacing as opposed to doing a chip or bath repair. Bath resurfacing encompasses repairing any chips. The reason we would recommend resurfacing in an older, worn bath rather than a bath repair or chip repair is because at the time of the repair the bath repair would be done to match the bath. If the bath is worn the worn areas will continue to attract dirt and gradually look worse. The bath repair will not attract dirt so eventually there will be a discrepancy and you will be able to see where the repair was done. A bath repair or chip repair works best on a relatively new bath.Try and tell us as much as you can about the bath when you inquire so we can recommend the correct course of action.

If you are a contractor & you are trying to have a bath repaired before a client sees it let us know. We make the repair as invisible as is possible as you look face onto the repair. But it will never be completely invisible from all angles. For example, if you painted half a wall exactly the same colour as the wall had already been painted 6 months earlier you would be able to see the edge if you looked for it. Similarly with a chip repair. If you keep looking for the repaired area you will eventually find an edge. If you are a contractor and it is important that the repair is not visible from any angle we would recommend you have the whole bath resurfaced. Any chips, dings or scratches will be rectified with the bath being completely resurfaced.

The type of repairs that can be done are chips to the enamel of cast-iron and pressed steel baths, scratches on enamel baths and pressed steel baths. Dents or dings to plastic or acrylic baths as well as scratches, cracks and also small holes punched through the surface of plastic or acrylic baths.

The procedure for doing a Bath Repair is to fill the chipped or dinged area and sand smooth.

Next, the material which is to be sprayed over the filled area is colour matched to the existing surface of the bath. We do the colour matching on site.This is the most important part of a Bath Repair and this procedure does require a lot of skill and experience.

Even if the existing surface is white, there are many, many shades of white. If the colour isn’t matched then the repaired area will stand out and catch the eye. A badly colour matched repair can look like someone has been in with a jar of tipex. If you have tried to repair a chip or ding yourself you’ll already have observed this.

Another difficulty can be the lighting. In one bathroom the lighting was such that although the tiles on the floor were exactly the same as the tiles on the walls, the tiles on the walls looked considerably darker. So a repair in this bathroom had to be carried out with a lot of expertise to get the exact colour match.

Once the colour is matched then the filled area is airbrushed over. The area may then be polished if any dust has landed on the wet material.

The procedure for a bath repair can also be applied to shower trays, wash hand basins and well also toilets.

Repairing cracks in an acrylic bath requires a completely different procedure. A successful repair to a crack is often dependant upon gaining access to the underside of the bath or cracked item.

It is best to contact The Bath Business directly for advice on how to repair your bath.

© Copyright The Bath Business - Theme by Pexeto